Gatling Drills 101.3 m of 1.1 g/t Au of Widespread, Near Surface Gold Mineralization at Larder Gold Project

News Highlights

• Continuous Near Surface Gold Mineralization at Fernland and Cheminis. Recent drilling indicates that the Fernland deposit contains both high-grade gold and continuous, near surface gold mineralization. The new holes targeted two zones (Figures 2 and 3) and test down plunge continuity from surface. GTR-20-088 intersected 1.1 g/t Au over 101.3 m at Zone 1 and drill hole GTR-20-089 has assays outstanding at Zone 2 (Figures 1, 3 and 4). The two zones are more than 400 m apart with gold values starting at surface and were drilled within the same south volcanic package indicating a large, continuous, near surface gold zone. Of note, the Cheminis deposit also hosts numerous near surface gold mineralized zones with historic results including as 3.6 g/t Au over 30.6 m, 4.5 g/t Au over 23.5 m, 1.9 g/t Au over 54.2 m, and 2.3 g/t Au over 35.0 m (Figure 5).

• Multiple Zones Identified at Fernland within 300 m of Surface. The Fernland deposit has three distinct zones that are displaced by faults containing multiple gold bearing lenses (Figure 2). These zones exhibit strong gold continuity from surface to 300 m (Figure 3). Gatling believes that there is potential to add a fourth zone with Q1 drilling focused on near surface gold mineralization to the west.

• Continued Expansion of Gold Mineralization between Fernland and Cheminis. Gatling continues to prove that all three deposits are in fact one large 4.5 km mineralized system. Hole GTR-20-071 intersected 7.9 g/t Au over 2.0 m at the new North zone discovered by Gatling in hole GTR-19-034. Recent drilling extends this zone 200 m along strike to the west which is located outside of the historic resource extents at the Cheminis deposit further connecting Fernland and Cheminis along strike.

• Comparable Dynamic Deposits within the District. The region contains numerous deposits that host both open pit and underground resources, such as Agnico Eagle's Upper Beaver deposit, Moneta Porcupine's Golden Highway deposits, and QMX's Bonnefond deposit. These deposits offer increased potential operating scenarios due to the flexibility of delivering gold ounces from both open pits followed by underground mining. Gatling will continue evaluate the vast potential across the three gold deposits at the Larder Gold Project.

Table 1. Drill Hole Highlights

Figure 1. Larder project long section showing the new gold mineralized zones identified from recent drill results and target areas for the 2021 drill campaign.

Figure 2. Geological plan map of the newly defined zones at the Fernland Deposit with multiple mineralized lenses at each zone and recent drill hole traces.

Figure 3. Level plan showing multiple gold zones and mineralization from surface down to 100 m below surface at the Fernland deposit.

Figure 4. Fernland long section showing the location of recent drill results, new mineralized zones, and gold contours connecting Fernland mineralization with Cheminis.

Figure 5. Cheminis long section showing the location of GTR-20-071 significant gold intersection and multiple historic near surface widespread gold zones.

About Gatling Exploration

Gatling Exploration is a Canadian gold exploration company focused on advancing the Larder Gold Project, located in the prolific Abitibi greenstone belt in Northern Ontario. The Larder property hosts three high-grade gold deposits along the Cadillac-Larder Lake Break, 35 km east of Kirkland Lake. The project is 100% controlled by Gatling and is comprised of patented and unpatented claims, leases and mining licenses of occupation within the McVittie and McGarry Townships. The 3,370 ha project area is positioned 7 km west of the Kerr Addison Mine, which produced 11 million ounces of gold. All parts of the Larder property are accessible by truck or all-terrain vehicles on non-serviced roads and trails.

QA/QC

Drill core is logged and sampled at the Larder Gold project site. Core samples from the program are cut in half, using a diamond cutting saw with half sent for assay at SGS lab in Cochrane, Ontario. The other half is secured and retained on site. All samples are analyzed for gold using standard Fire Assay-AA techniques. Samples returning greater than 5.0 g/t gold are analyzed utilizing standard Fire Assay-Gravimetric methods. Certified reference standards and blanks are routinely inserted into the sample stream as part of Gatling's quality control/quality assurance program.

Qualified Person

The technical content of this news release has been reviewed and approved by Nathan Tribble, P. Geo., VP Exploration of Gatling Exploration, and a Qualified Person pursuant to National Instrument 43-101.

ON BEHALF OF THE BOARD OF DIRECTORS,

Jason Billan, President and CEO
Gatling Exploration Inc.

For further information on Gatling, contact Investor Relations

Telephone: 1-888-316-1050
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward Looking Statements: Statements contained in this news release that are not historical facts are forward-looking statements, which are subject to a number of known and unknown risks, uncertainness and other factors that may cause the actual results to differ materially from those anticipated in our forward-looking statements. Although we believe that the expectations in our forward-looking statements are reasonable, actual results may vary, and we cannot guarantee future results, levels of activity, performance or achievements.

SOURCE: Gatling Exploration Inc.