- Published: 22 July 2019
- Written by Editor
Bonterra Intersects 18.5 g/t Au over 3.0 m at Gladiator and 11.6 g/t Au over 2.9 m at Barry
Figure 1
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/1528/46408_ed5a7f4e54bcaa4c_001full.jpg
Figure 2
To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/1528/46408_ed5a7f4e54bcaa4c_002full.jpg
- Barry
Drilling at Barry focused on the extension of the H1 Zone on the western limit of the deposit. Hole MB-19-218 intersected 12.7 g/t Au over 1.8 meters in mineralized shear zone extending H1 Zone more than 50 meters to the west. Drill hole MB-19-216 extended H1 zone by more than 100 meters at depth intersecting 11.6 g/t Au over 2.9 m. Hole MB-19-219 also intersected the H1 zone at depth with 4.9 g/t Au over 4.1 m. (See map and sections)
Figure 3
To view an enhanced version of this Figure 3, please visit:
https://orders.newsfilecorp.com/files/1528/46408_ed5a7f4e54bcaa4c_003full.jpg
Bonterra continues its summer drilling campaign at the Urban Barry Camp with two drill rigs at Moroy, one at Barry and one at Gladiator. The Company will shortly mobilize an additional mobile heli-portable diamond drill rig to drill-test regional exploration targets on the Gladiator Project.
Drilling highlights:
Project | Drillhole | From | To | Length (m) | Au (g/t) |
Gladiator | BA-19-39 | 100.8 | 105.7 | 4.9 | 7.8 |
123 | 126 | 3.0 | 12.1 | ||
206 | 207.5 | 1.5 | 8.0 | ||
358.8 | 362 | 3.2 | 8.3 | ||
BA-19-41 | 87 | 89 | 2.0 | 11.4 | |
197.8 | 200.5 | 2.7 | 3.3 | ||
231.6 | 233.5 | 1.9 | 3.4 | ||
421 | 423 | 2.0 | 8.7 | ||
536.5 | 538 | 1.5 | 4.9 | ||
546 | 547.2 | 1.2 | 4.9 | ||
553.5 | 558.5 | 5.0 | 6.6 | ||
Including | 557.5 | 558.5 | 1.0 | 28.5 | |
651 | 654 | 3.0 | 18.5 | ||
BA-19-42 | 106.5 | 108 | 1.5 | 8.8 | |
349.5 | 358.4 | 8.9 | 4.8 | ||
Including | 349.5 | 352.5 | 3.0 | 13.0 | |
BA-19-43 | 36.0 | 38.0 | 2.0 | 5.0 | |
Barry | MB-19-216 | 205.1 | 207.2 | 2.1 | 5.8 |
411.5 | 414.4 | 2.9 | 11.6 | ||
MB-19-218 | 33.0 | 36.5 | 1.3 | 3.5 | |
99.7 | 101.5 | 1.8 | 12.7 | ||
MB-19-219 | 515.5 | 519.5 | 4.1 | 4.9 |
*Stated lengths are core lengths as drilled. True mineralization widths vary and average between 60 and 80 percent drilled widths. Core axis angles of the intersection contacts and surrounding rock units average 55 to 70 degrees.
Quality Control and Reporting Protocols
Bonterra estimates that the actual thicknesses of the mineralized intersections are between 60% and 80% of the core lengths. No capping grade is used at this stage. The Company uses a rigorous QA-QC analytical program according to industry standards. The analytical results were done by pyroanalysis (A.A.) at the mine laboratory. Blanks, duplicates and certified reference standards are inserted into the sample stream to monitor laboratory performance. The company's QA-QC analytical verification program requires that a minimum of 5% of the samples be audited at an independent laboratory. These audit assays were sent to ALS laboratory located in Val-d'Or, Quebec. The results of the audits are consistent with those obtained.
Bonterra Resources Quick Facts:
- Control of three high-grade gold deposits (Gladiator, Barry and Moroy) and significant regional targets
- 100% ownership of the Urban-Barry Mill, the only permitted gold mill in the region
- Strong shareholder base including Eric Sprott and Kirkland Lake Gold
- Property-wide NI 43-101 Mineral Resource Estimate recently updated with a combined resource of 55,000 Oz Au Measured, 643,000 Oz Au Indicated and 1,405,000 Oz Au Inferred.
Pascal Hamelin, P.Eng. has approved the information contained in this release. Mr. Hamelin, Bonterra's VP Operatons, is a Qualified Person as defined by NI 43-101.
ON BEHALF OF THE BOARD OF DIRECTORS,
Greg Gibson, Interim CEO
Bonterra Resources Inc.
For further information on Bonterra, contact Investor Relations
Telephone: 1 819-825-8678
Website: www.bonterraresources.com
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This press release contains "forward-looking information" that is based on Bonterra's current expectations, estimates, forecasts and projections. This forward-looking information includes, among other things, statements with respect to Bonterra's exploration and development plans. The words "will", "anticipated", "plans" or other similar words and phrases are intended to identify forward-looking information. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause Bonterra's actual results, level of activity, performance or achievements to be materially different from those expressed or implied by such forward-looking information. Such factors include, but are not limited to: uncertainties related exploration and development; the ability to raise sufficient capital to fund exploration and development; changes in economic conditions or financial markets; increases in input costs; litigation, legislative, environmental and other judicial, regulatory, political and competitive developments; technological or operational difficulties or inability to obtain permits encountered in connection with exploration activities; and labour relations matters. This list is not exhaustive of the factors that may affect our forward-looking information. These and other factors should be considered carefully and readers should not place undue reliance on such forward-looking information. Bonterra disclaims any intention or obligation to update or revise forward-looking information, whether as a result of new information, future events or otherwise.