Category: Silver / Gold

Atlantic Gold Reports First Assay Results from the Phase 3 Resource Expansion Drill Program at Fifteen Mile Stream

PHASE 2 EXPANSION LIFE OF MINE PLAN SCHEDULED FOR JANUARY 2018
 
HIGHLIGHTS INCLUDE: 
14m @ 1.79 g/t from 77m, 17m @ 1.12g/t from 80m, 4m @ 7.27g/t from 19m (incl 1m @ 23.4g/t) and 12m @ 1.44g/t from 194m
 
INFILLING, AND IDENTIFYING EXTENSIONS TO, KNOWN MINERALIZATION AT FIFTEEN MILE STREAM
 
VANCOUVER, Dec. 20, 2017  - Atlantic Gold Corporation (TSX-V: AGB) ("Atlantic" or the "Company") is pleased to report the first assay results received from the Phase 3 Resource Expansion drilling program at the Fifteen Mile Stream gold deposit.

Fifteen Mile Stream is located approximately 57km northeast of the central processing facility at Touquoy and is readily accessible by highway. Fifteen Mile Stream's current measured and indicated mineral resources stand at 10.59 million tonnes at 1.33 g/t Au for 452,000 oz. at 0.35g/t cut-off grade.  Inferred mineral resources amount to 6.64 million tonnes at 1.12 g/t Au for 240,000 oz. at 0.35g/t cut-off grade (see Company announcement July 21, 20171).

The objectives of the Phase 3 Resource Expansion drilling program are to:

  i.

identify additional gold resources immediately peripheral to those resources previously defined at Fifteen Mile Stream and Cochrane Hill;

 ii.

at Cochrane Hill and at Fifteen Mile Stream – particularly at the Hudson and Plenty zones, upgrade previously defined inferred resources to measured and indicated categories; and

iii.

seek additional new resources within the 350m gap between the Plenty and Egerton MacLean zones at Fifteen Mile Stream.  

 

_________________________

1The Mineral Resource estimate for Fifteen Mile Stream is quoted at a cut-off grade of 0.35g/t. It has an effective date of July 20, 2017 and was prepared as part of a technical report in accordance with NI 43-101 by Mr. Neil Schofield, a principal of FSSI (Australia) Pty Ltd, released on September 1, 2017 on SEDAR.

 

At the present time a total of 178 holes for 20,053m have been drilled at Fifteen Mile Stream and 44 holes for 6,903m have been drilled at Cochrane Hill. While the planned program at Cochrane Hill has been completed, some 6,000m of planned and likely follow-up drilling remains to be undertaken at Fifteen Mile Stream, mainly on the Plenty zone. Holes are nominally drilled on 25m x 20m centres, though as first-pass drilling along the 350m gap between Plenty and Egerton MacLean holes have been drilled on 50m-spaced sections.

Assay results have now been received from 28 holes, all from Fifteen Mile Stream, and representing about 13% of all assays expected; no assays have yet been returned for Cochrane Hill. Although these assayed holes are widely distributed along the trend of the mineralized anticline it appears that:

a)

the Egerton MacLean zone remains open eastwards where FMS-17-200 on the easternmost section (13675E) cut 14m @ 1.79g/t flanked by supporting mineralization in adjacent holes

b)

initial infill on 25m-spaced sections at the western end of Egerton MacLean suggests continuity of shallow mineralization (eg. 4m @ 7.27g/t from 19m); and

c)

results from a 25m infill section on the eastern side of Hudson similarly indicates continuity of mineralization between the existing 50m-spaced sections (eg. 17m @ 1.12g/t from 80m).  

 

The accompanying cross sections and drilling progress plan can be viewed here: 
http://files.newswire.ca/1485/AtlanticGoldPlan.pdf

Assay results are tabulated below:

Hole id

Easting

Northing

Dip

Az.

Depth

(m)

Significant Intervals

(≥0.5g/t Au and up to 3m internal dilution)

From

(m)

To

(m)

Width

(m)

Grade

(g/t Au)

EGERTON MACLEAN

FMS-17-192

13475

10280

-60

175

302

151

158

7

1.15

and

         

169

172

3

2.78

and

         

200

201

1

8.45

and

         

209

210

1

33.2

FMS-17-193

13500

10320

-60

175

260

180

193

13

0.98

and

         

233

234

1

5.20

FMS-17-194

13475

10280

-70

175

251

158

173

15

0.78

and

         

194

206

12

1.44

and

         

218

222

4

3.22

FMS-17-195

13225

10040

-45

175

82

35

40

5

0.63

and

         

50

51

1

3.95

FMS-17-196

13675

10220

-60

175

140

101

105

4

0.55

and

         

109

113

4

3.10

and

         

117

123

6

0.95

FMS-17-197

13225

10060

-45

175

121

     

NSA

FMS-17-198

13675

10200

-60

175

122

91

105

14

0.77

FMS-17-199^

13225

10080

-45

175

142

130

131

1

9.44

FMS-17-200^

13675

10180

-60

175

110

77

91

14

1.79

FMS-17-201^

13675

10160

-60

175

92

62

70

8

0.79

FMS-17-202^

13225

10020

-45

175

61

43

44

1

3.93

and

         

49

50

1

11.55

FMS-17-203^

13675

10140

-60

175

80

51

54

3

1.14

FMS-17-204^

13225

10000

-45

175

52

19

23

4

7.27

Incl.

         

20

21

1

23.4

FMS-17-205^

13650

10220

-60

175

140

102

124

22

0.65

FMS-17-207^

13250

9980

-45

175

100

91

92

1

3.12

FMS-17-208^

13200

9940

-45

175

100

31

36

5

0.95

FMS-17-209^

13625

10220

-60

175

140

88

89

1

3.52

FMS-17-211^

13600

10220

-60

175

140

91

98

7

0.48

and

         

130

131

1

19.4

                   

HUDSON

                 

FMS-17-210^

12475

10020

-45

175

52

18

19

1

12.50

FMS-17-212^

12475

10040

-45

175

70

7

8

1

9.27

FMS-17-213^

12475

10060

-45

175

82

60

65

5

2.25

FMS-17-214^

12375

10140

-45

175

172

47

49

2

1.59

and

         

92

114

22

0.78

FMS-17-220^

12300

10120

-45

175

170

114

120

6

1.60

           

125

130

5

0.70

           

138

145

7

0.63

FMS-17-224^

12375

10120

-45

175

151

48

49

1

3.94

and

         

79

83

4

1.82

and

         

87

91

4

1.74

and

         

103

106

3

5.96

and

         

116

120

4

1.29

FMS-17-230^

12300

10040

-45

175

80

     

NSA

FMS-17-235^

12300

10140

-45

175

190

68

69

1

12.65

and

         

125

126

1

13.80

FMS-17-240^

12475

10100

-45

175

122

7

8

1

8.79

and

         

62

63

1

3.88

and

         

80

97

17

1.12

FMS-17-242^

12475

10080

-45

175

101

58

63

5

1.65

and

         

78

81

3

2.08

NSA: No significant assays; that is, no intervals ≥ 3.0g/t x m.  

^ Fire assays of half NQ core, otherwise whole NQ core (see Technical Disclosure below)

 

True width of the mineralization varies according to the dip of the host stratigraphy and declination of the relevant drill hole. For intersections quoted above true width averages 90% of the down-hole width.

Nature of the mineralization:

Mineralization occurs within argillites, greywackes and bedding-parallel quartz veins across the hinge zone and limbs of the E-W trending Fifteen Mile Stream (FMS) Anticline. The northern limb of the anticline dips moderately north, with the southern limb overturned (generally steeply north dipping).  All holes are therefore declined to the south. Highest grades so far encountered occur within the hinge zone of the anticline. Free gold is commonly observed, and in association with pyrrhotite and arsenopyrite.

Technical Disclosure

At Fifteen Mile Stream all assays by default are 50g charge fire assays of 1kg pulverized sub-sample split from -2mm crushed parent of whole 1m NQ core, with 1-in-10 duplicate assays of the same pulp, and 1-in-10 assays of a second 1kg pulverized sub-sample split from the same crushed parent. Where otherwise noted (^) assays are 50g charge fire assays of 1kg pulverized sub-sample split from -2mm crushed parent of sawn half 1m NQ core, with 1-in-10 duplicate assays of the same pulp. Standards and blind blanks are routinely inserted. Sample preparation and assaying is conducted at the Sudbury and Vancouver laboratories of ALS Canada Ltd, an entity having no other relationship with the Company.  Core recovery is estimated for each metre and averages >97%, excluding occasional voids, usually <2m, representing historic underground workings. Wing samples to voids may be less than 1m to re-establish routine sampling on 1m intervals. Drill core in the hangingwall of the northern limb of the anticline where adjacent historic holes very clearly indicate this upper stratigraphy to be barren may not be sampled and assayed. Standards, blanks and duplicate assay results are acceptable.

Results and updates from this drilling program will be reported progressively.

Phase 2 Expansion Life of Mine Plan Scheduled for January 2018

The Company has now scheduled the release of the Phase 2 Expansion Life of Mine Plan and supporting Pre-Feasibility Study for January 2018 due to un-anticipated delays in respect of receipt of engineering inputs.

Wally Bucknell, Director of Exploration to the Company and a Qualified Person as defined by National Instrument 43-101 ("NI 43-101") has reviewed and approved the contents of this news release.

Further updates will be provided in due course and as new results come to hand.

On behalf of the Board of Directors,

Steven Dean
Chairman and Chief Executive Officer

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Statements:

This release contains certain "forward looking statements" and certain "forward-looking information" as defined under applicable Canadian and U.S. securities laws. Forward-looking statements and information can generally be identified by the use of forward-looking terminology such as "may", "will", "expect", "intend", "estimate", "anticipate", "believe", "continue", "plans" or similar terminology. Forward-looking statements and information are not historical facts, are made as of the date of this press release, and include, but are not limited to, statements regarding discussions of future plans, guidance, projections, objectives, estimates and forecasts and statements as to management's expectations with respect to, among other things, the activities contemplated in this news release and the timing and receipt of requisite regulatory, and shareholder approvals in respect thereof. Forward-looking statements in this news release include, without limitation, statements related to proposed exploration and development programs, grade and tonnage of material and resource estimates. These forward looking statements involve numerous risks and uncertainties and actual results may vary. Important factors that may cause actual results to vary include without limitation, the timing and receipt of certain approvals, changes in commodity and power prices, changes in interest and currency exchange rates, risks inherent in exploration estimates and results, timing and success, inaccurate geological and metallurgical assumptions (including with respect to the size, grade and recoverability of mineral reserves and resources), changes in development or mining plans due to changes in logistical, technical or other factors, unanticipated operational difficulties (including failure of plant, equipment or processes to operate in accordance with specifications, cost escalation, unavailability of materials, equipment and third party contractors, delays in the receipt of government approvals, industrial disturbances or other job action, and unanticipated events related to health, safety and environmental matters), political risk, social unrest, and changes in general economic conditions or conditions in the financial markets. In making the forward-looking statements in this press release, the Company has applied several material assumptions, including without limitation, the assumptions that: (1) market fundamentals will result in sustained gold demand and prices; (2) the receipt of any necessary approvals and consents in connection with the development of any properties; (3) the availability of financing on suitable terms for the development, construction and continued operation of any mineral properties; and (4) sustained commodity prices such that any properties put into operation remain economically viable. Information concerning mineral reserve and mineral resource estimates also may be considered forward-looking statements, as such information constitutes a prediction of what mineralization might be found to be present if and when a project is actually developed. Certain of the risks and assumptions are described in more detail in the Company's audited financial statements and MD&A for the year ended December 31, 2016 and for the quarter ended September 30, 2017 on the SEDAR website at www.sedar.com. The actual results or performance by the Company could differ materially from those expressed in, or implied by, any forward-looking statements relating to those matters. Accordingly, no assurances can be given that any of the events anticipated by the forward-looking statements will transpire or occur, or if any of them do so, what impact they will have on the results of operations or financial condition of the Company. Except as required by law, the Company is under no obligation, and expressly disclaim any obligation, to update, alter or otherwise revise any forward-looking statement, whether written or oral, that may be made from time to time, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws.

SOURCE Atlantic Gold Corporation

 

View original content with multimedia: http://www.newswire.ca/en/releases/archive/December2017/20/c2845.html

Contact:

about Atlantic, please contact: Maryse Bélanger (COO), +1 604 689-5564; Sean Thompson (Manager Investor Relations), Toll Free: 1 877 689-5599

Videos / Webinars

View all videos