Integra Gold Intersects 14.82 g/t Gold Over 7.9 m in C2 Structure, 15.64 g/t Gold Over 6.7 m and 12.91 g/t Gold Over 4.0 m in C4 Splay Structure (All Results Uncapped)

As illustrated in the longitudinal sections for C2 (see link below), results from numerous intercepts in these structures are still pending.

http://www.integragold.com/i/maps/LS_C2-DDH_20160809_with_class.pdf

Additional High-Grade Mineralization identified between C-Type Structures

In addition to the mineralization identified in the primary C and C-Flat structures, high grade gold bearing intercepts continue to be identified between the well-defined C-Type structures, demonstrating the possibility for additional mineralized structures to occur in between the major structures. These mineralized zones represent additional potential resource upside which will be fully evaluated during resource estimation and through close spaced underground drilling once underground access is granted.

Some the significant results include (all results uncapped):

• 113.89 g/t Au over 0.5m (TM-15-064W01M02)
• 82.95 g/t Au over 0.5m (TM-16-101)
• 22.05 g/t Au over 1.1m and 172.34 g/t Au over 0.5m (TM-16-103AM01)
• 26.76 g/t Au over 0.6m (TM-16-153B M01)

Lamaque Project Exploration Program Summary

In 2016 a total of 82,000m have thus far been completed at Lamaque South; drilling is ongoing with 4 drill rigs currently in operation. The results announced today are from 23 drill holes representing 14,370m. As of August 10, 2016 drill results are still pending from an additional 137 drill holes at Lamaque representing 51,772m; for Triangle alone there are pending results for 121 drill holes representing 44,370m. Results will continue to be disclosed regularly as they become available.

Triangle Deposit Summary

Triangle consists of a series of high-grade, parallel, steeply to moderately dipping mineralized shear zones ("C" structures) structurally spaced at 125 to 150m intervals, hosting gold-bearing quartz-carbonates-tourmaline veins, which contains the majority of the deposit's gold resources. The C1 and C2 structures occur from surface to 300 and 475m vertical respectively, the C4, C5, C6 structures occur between 320m and 875m vertically, and the recently identified C7 structure is presently known to extend from at least 975m to 1,150m vertically. The lateral and down-dip limits of mineralization for the deeper C structures (C5, C6 and C7) has yet to be identified and are open for expansion.

Drilling conducted since August 2015 at Triangle has focused on infill and step-out/extensional drilling within select areas of the C1, C2, C4, C5 and C6 structures, and on deep testing of Triangle below 1,000m vertically. Characteristic geological host units, structural deformation in the form of shearing and alteration assemblages associated with gold bearing veins are present within the structures observed to date in most drill holes at Triangle. Ongoing results continue to demonstrate the validity of the predictive nature of the geological model and associated high grade gold bearing vein structures.

Project and Company Profile

Integra Gold is a junior gold exploration company advancing projects in Val-d'Or, Québec, one of the top mining jurisdictions in the world. The Company's primary focus is its high-grade Lamaque South project. In 2014, Integra completed the accretive acquisition of the Sigma Mill and Mine Complex, a fully permitted 2,200 ton per day mill and tailings facility. With major federal and provincial permits in place, existing infrastructure and exploration potential, this acquisition removed major costs and shortened timelines typically associated with mine projects. With a current market capitalization of approximately $450 million, Integra has raised over $100 million since 2013, at successively higher share prices. Integra was recently named to the TSX Venture top 50 performers in 2015 and the OTCQX Best 50 award for 2015.

Qualified Person

The Lamaque project is under the direct supervision of Hervé Thiboutot, Eng., Senior Vice-President of the Company, and Jacques Simoneau, P. Geo., Exploration Manager of the Company. Mr. Thiboutot and Mr. Simoneau are Qualified Persons ("QPs") as defined by the National Instrument 43-101. The Company's QPs have reviewed the technical content of this release.

Quality Assurance - Quality Control ("QA/QC")

Thorough QA/QC protocols are followed on the project including insertion of duplicate, blank and standard samples in all drill holes. The core samples are submitted directly to the Bourlamaque and ALS Laboratories in Val-d'Or for preparation and analysis. Analysis is conducted on 1 assay-ton aliquots. Analysis of Au is performed using fire assay method with atomic absorption (AA) finish, with a gravimetric finish completed for samples exceeding 5 g/t Au. Results published are from the gravimetric finish if above 5 g/t and from the AA finish if lower than 5 g/t.

ON BEHALF OF THE BOARD OF DIRECTORS

Stephen de Jong
CEO & President

Follow Integra Gold On:

• Twitter: http://twitter.com/integragoldcorp

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

Cautionary Note Regarding Forward-Looking Statements: Certain disclosures in this release constitute forward-looking statements, including timing of completion of an updated resource estimate, timing of completion of an updated PEA and completion of the Sigma-Lamaque transaction. In making the forward-looking statements in this release, the Company has applied certain factors and assumptions that are based on the Company's current beliefs as well as assumptions made by and information currently available to the Company, including that the Company is able to obtain any government or other regulatory approvals, that the Company is able to procure personnel, equipment and supplies required for its exploration and development activities in sufficient quantities and on a timely basis and that actual results are consistent with management's expectations. Although the Company considers these assumptions to be reasonable based on information currently available to it, they may prove to be incorrect, and the forward-looking statements in this release are subject to numerous risks, uncertainties and other factors that may cause future results to differ materially from those expressed or implied in such forward-looking statements. Such risk factors include, among others, those matters identified in its continuous disclosure filings, including its most recently filed MD&A. Readers are cautioned not to place undue reliance on forward-looking statements. The Company does not intend, and expressly disclaims any intention or obligation to, update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by law.