Category: Silver / Gold

Skeena Discovers High Grade Mineralization in Former Eskay Creek Waste Facility Including 6.89 g/t AuEq over 22.80 metres

VANCOUVER, BC /  May 25, 2021 / Skeena Resources Limited (TSX:SKE)(OTCQX:SKREF) ("Skeena" or the "Company") is pleased to report drilling results from the 2021 permitted Albino Waste Facility ("AWF" or "Albino") investigation at the Eskay Creek Project ("Eskay Creek" or the "Project") located in the Golden Triangle of British Columbia. This initial examination, totaling 190 m, was completed utilizing an air rotary drill rig from the ice surface of the AWF in March 2021. Analytical results from the first four of eight drill holes are presented in this release. The remaining holes will be released once analyses are available. Reference images are presented at the end of this release as well as on the Company's website.
Eskay Creek AWF 2021 Highlights:
 
4.17 g/t Au, 160 g/t Ag (6.31 g/t AuEq) over 16.01 m (SK-21-841)
4.18 g/t Au, 190 g/t Ag (6.72 g/t AuEq) over 12.16 m (SK-21-842)
4.16 g/t Au, 204 g/t Ag (6.89 g/t AuEq) over 22.80 m (SK-21-843)
3.13 g/t Au, 127 g/t Ag (4.82 g/t AuEq) over 19.76 m (SK-21-844)

Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths equate to 100% of reported sample lengths. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.

Historical Waste Facility Demonstrates Significant Grade and Potential
Situated west of the Eskay Creek mine site, the Albino Waste Facility was utilized by former operators as a subaqueous repository for mine waste management and included both mine waste rock as well as mill tailings.

During historical operations, the underground mine development was largely tunneled in the often-mineralized footwall Rhyolite sequences below the mined Contact Mudstone. Although these rocks possessed variable Au-Ag grades, former operators considered the Rhyolite-hosted mineralization uneconomic due to the high cutoff grades required at the time. Hence, this development rock was transferred to the AWF for subaqueous deposition.

Via the initial drill-based investigation in Q1 2021, the Company has now empirically demonstrated that significant Au-Ag mineralization was in fact deposited at Albino. The area of the AWF measures 128,900 m2, of which the Company has only tested a small portion measuring 5,200 m2. As such, only 4% of the entire AWF has been investigated to date. This first phase of drilling was performed on staggered 50 m centers from the frozen ice surface. Although more drill holes were planned, ice conditions deteriorated, and the program was terminated early for safety reasons.

Analytical results for the first four drill holes indicate excellent downhole as well as hole to hole Au-Ag grade continuity. Of particular note are the relatively low concentrations of mercury which only range from 11 to 99 ppm. Arsenic and antimony concentrations are variable but fall within expected values and are detailed in Table 1.

Next Steps - 2021 Program Extension
The Company is currently planning an extension to this drilling program which will be completed in the second half of 2021 based on the positive results from the preliminary investigation.

About Skeena
Skeena Resources Limited is a Canadian mining exploration company focused on revitalizing the past-producing Eskay Creek gold-silver mine located in Tahltan Territory in the Golden Triangle of northwest British Columbia, Canada. The Company released a robust Preliminary Economic Assessment in late 2019 and is currently focused on infill and exploration drilling to advance Eskay Creek to full Feasibility by Q1 2022. Additionally, Skeena continues exploration programs at the past-producing Snip gold mine.

On behalf of the Board of Directors of Skeena Resources Limited,
Walter Coles Jr.
President & CEO

Contact Information
Investor Inquiries: This email address is being protected from spambots. You need JavaScript enabled to view it.
Office Phone: +1 604 684 8725
Company Website: www.skeenaresources.com

Qualified Persons
Exploration activities at the Eskay Creek Project are administered on site by the Company's Exploration Managers, Raegan Markel, P.Geo. and John Tyler. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting the exploration activities on its projects.

Quality Assurance - Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company's Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.

Drill core samples are submitted to ALS Geochemistry's analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1 kg is pulverized. Analysis for gold is by 50 g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 50 g fire assay fusion with gravimetric finish. Analysis for silver is by 50 g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000 ppm. Samples with silver assays greater than 10,000 ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-element geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.

Cautionary Note Regarding Forward-Looking Statements
Certain statements made and information contained herein may constitute "forward-looking information" and "forward-looking statements" within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet management's expectations. Forward-looking statements and information may be identified by such terms as "anticipates", "believes", "targets", "estimates", "plans", "expects", "may", "will", "could" or "would". Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.

Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.

Table 1: Eskay Creek Project 2021 Albino Drilling Campaign Length-Weighted Drill Hole Composites:

Hole-ID

From (m)

To (m)

Sample Length (m)

Au (g/t)

Ag (g/t)

AuEq (g/t)

Hg (ppm)

Sb (ppm)

As (ppm)

SK-21-841

2.33

3.85

1.52

4.41

131

6.16

67

842

284

SK-21-841

3.85

7.70

3.85

3.40

153

5.44

60

3,610

304

SK-21-841

7.70

9.22

1.52

3.66

170

5.93

60

3,620

289

SK-21-841

9.22

10.74

1.52

5.38

253

8.75

60

3,970

302

SK-21-841

10.74

12.26

1.52

2.58

93

3.82

23

1,260

259

SK-21-841

12.26

13.78

1.52

6.58

321

10.86

90

5,420

383

SK-21-841

13.78

15.30

1.52

2.67

62

3.50

13

280

260

SK-21-841

15.30

16.82

1.52

4.30

98

5.61

28

468

286

SK-21-841

16.82

18.34

1.52

5.77

169

8.02

40

733

282

Composite

2.33

18.34

16.01

4.17

160

6.31

51

2,443

296

SK-21-842

4.63

6.15

1.52

3.69

166

5.90

20

507

257

SK-21-842

6.15

7.67

1.52

3.45

145

5.38

24

523

385

SK-21-842

7.67

9.19

1.52

4.38

300

8.38

44

908

423

SK-21-842

9.19

10.71

1.52

5.45

241

8.66

43

840

361

SK-21-842

10.71

12.23

1.52

4.73

225

7.73

45

835

334

SK-21-842

12.23

13.75

1.52

3.83

128

5.54

34

611

270

SK-21-842

13.75

15.27

1.52

1.30

52

1.99

11

190

97

SK-21-842

15.27

16.79

1.52

6.64

263

10.15

48

876

174

Composite

4.63

16.79

12.16

4.18

190

6.72

34

661

288

SK-21-843

3.04

6.08

3.04

2.23

104

3.62

23

524

341

SK-21-843

6.08

7.60

1.52

4.82

304

8.87

53

1,635

462

SK-21-843

7.60

9.12

1.52

3.79

269

7.38

39

821

408

SK-21-843

9.12

10.64

1.52

11.75

403

17.12

62

4,770

470

SK-21-843

10.64

12.16

1.52

7.86

593

15.77

87

2,180

679

SK-21-843

12.16

13.68

1.52

5.31

299

9.30

59

1,430

574

SK-21-843

13.68

15.20

1.52

8.37

371

13.32

99

2,400

784

SK-21-843

15.20

16.72

1.52

4.18

159

6.30

51

1,205

325

SK-21-843

16.72

18.24

1.52

2.71

111

4.19

35

735

219

SK-21-843

18.24

19.76

1.52

2.56

97

3.85

35

654

171

SK-21-843

19.76

21.28

1.52

2.65

98

3.95

32

719

210

SK-21-843

21.28

22.80

1.52

1.03

35

1.50

15

280

155

SK-21-843

22.80

24.32

1.52

1.14

56

1.89

23

501

160

SK-21-843

24.32

25.84

1.52

1.76

64

2.61

17

639

185

Composite

3.04

25.84

22.80

4.16

204

6.89

44

1,268

366

SK-21-844

1.95

4.99

3.04

2.12

62

2.94

11

244

161

SK-21-844

4.99

6.51

1.52

2.07

76

3.08

12

309

186

SK-21-844

6.51

8.03

1.52

4.74

66

5.62

15

350

291

SK-21-844

8.03

9.55

1.52

3.39

99

4.71

17

445

398

SK-21-844

9.55

11.07

1.52

2.98

137

4.81

23

593

263

SK-21-844

11.07

12.59

1.52

4.06

186

6.54

26

735

260

SK-21-844

12.59

14.11

1.52

3.49

135

5.29

40

679

326

SK-21-844

14.11

15.63

1.52

3.27

97

4.56

31

642

476

SK-21-844

15.63

17.15

1.52

3.57

204

6.29

26

713

396

SK-21-844

17.15

18.67

1.52

3.16

224

6.15

27

760

455

SK-21-844

18.67

20.19

1.52

5.13

271

8.74

41

925

539

SK-21-844

20.19

21.71

1.52

0.55

35

1.02

7

132

69

Composite

1.95

21.71

19.76

3.13

127

4.82

22

521

306

Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths equate to 100% of reported sample lengths. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.

Table 2Mine Grid Drill Hole Locations and Orientations:

Hole-ID

Easting (m)

Northing (m)

Elevation (m)

Length (m)

Azimuth (°)

Dip (°)

SK-21-841

6686.3

9475.2

1049.00

25.9

0.0

-90.0

SK-21-842

6734.2

9551.6

1049.80

19.8

0.0

-90.0

SK-21-843

6647.5

9622.3

1049.80

35.0

0.0

-90.0

SK-21-844

6645.3

9566.4

1049.78

29.3

0.0

-90.0

 

 

 

 

SOURCE: Skeena Resources Limited