Category: Silver / Gold

Osisko Expansion Drilling Adds New High Grade at Lynx

177 g/t Au Over 3.0 Metres
 
TORONTO, March 17, 2021  -- Osisko Mining Inc. (OSK:TSX. "Osisko" or the "Corporation") is pleased to provide new analytical results from the ongoing drill program at its 100% owned Windfall gold project located in the Abitibi greenstone belt, Urban Township, Eeyou Istchee James Bay, Québec.
 
Drilling is currently focused on the Lynx deposit. Significant new analytical results presented below include 66 intercepts in 22 drill holes (5 from surface, 17 from underground) and 21 wedges. The intercepts are located outside the February 2021 mineral resource estimate (“MRE”) (see Osisko news release dated February 17, 2021) and either expand resource wireframes or are located in a defined zone or corridor but do not yet correlate to a specific wireframe.
 
Osisko Chief Executive Officer John Burzynski commented: “Today’s expansion results in Lynx and Triple Lynx continue to confirm the growth potential of these zones. The higher-grade intercept in OSK-W-20-2381-W1 extends Lynx 90 metres from the nearest MRE block and WST-20-0602 extends Triple Lynx 100 metres from the nearest MRE block”.

Selected high-grade intercepts include: 177 g/t Au over 3.0 metres and 66.6 g/t Au over 2.0 metres in OSK-W-20-2381-W1; 43.4 g/t Au over 5.3 metres in WST-20-0602; 56.4 g/t Au over 3.2 metres in WST-20-0603; 52.1 g/t Au over 3.4 metres in WST-20-0611; 70.2 g/t Au over 2.2 metres in OSK-W-20-2313-W7; 57.2 g/t Au over 2.1 metres in OSK-W-20-2391; and 25.1 g/t Au over 4.8 metres in OSK-W-20-2252-W8. Maps showing hole locations and full analytical results are available at www.osiskomining.com

Expansion Drilling

Hole No. From
(m)
To
(m)
Interval
(m)
Au (g/t)
uncut
Au (g/t)
cut to 100 g/t
Zone Corridor
OSK-W-20-2170-W7 1029.6 1031.9 2.3 11.1   Triple Lynx
 
Triple Lynx
 
including 1029.6 1030.0 0.4 59.7  
OSK-W-20-2252-W10 1182.6 1184.8 2.2 3.89   Triple Lynx Triple Lynx
  1190.2 1192.4 2.2 13.8   Triple Lynx
 
Triple Lynx
 
including 1191.2 1192.1 0.9 31.3  
  1204.3 1206.3 2.0 4.22   Triple Lynx Triple Lynx
OSK-W-20-2252-W8 975.2 980.0 4.8 25.1 22.6 Triple Lynx
 
Triple Lynx
 
including 976.5 977.7 1.2 85.8 75.6
OSK-W-20-2271-W2 1133.5 1135.5 2.0 3.64   Lynx 4
 
Lynx
 
including 1134.0 1134.5 0.5 14.5  
OSK-W-20-2271-W5 1064.6 1067.4 2.8 4.74   Lynx 4
 
Lynx
 
including 1064.6 1065.0 0.4 13.1  
OSK-W-20-2280-W7 977.0 981.8 4.8 7.78   Triple Lynx
 
Triple Lynx
 
including 977.0 977.4 0.4 30.4  
OSK-W-20-2283-W2 951.0 953.0 2.0 3.94   Triple Lynx Triple Lynx
OSK-W-20-2287 1245.0 1247.0 2.0 3.51   Lynx 4 Lynx
OSK-W-20-2292-W1 1131.8 1134.0 2.2 3.66   Triple Lynx
 
Triple Lynx
 
including 1131.8 1132.1 0.3 23.5  
OSK-W-20-2313-W7 993.0 995.2 2.2 70.2 14.4 Triple Lynx
 
Triple Lynx
 
including 994.9 995.2 0.3 509 100
OSK-W-20-2313-W9 793.0 797.5 4.5 5.65   Triple Lynx
 
Triple Lynx
 
including 796.5 797.5 1.0 13.4  
OSK-W-20-2322-W1 1047.4 1049.7 2.3 3.69   Lynx 4
 
Lynx
 
including 1047.4 1048.0 0.6 13.7  
OSK-W-20-2328 898.2 900.5 2.3 3.64   Lynx 4 Lynx
OSK-W-20-2363 578.0 582.0 4.0 6.19   Triple Lynx
 
Triple Lynx
 
including 581.3 582.0 0.7 24.4  
OSK-W-20-2363-W1 662.0 664.1 2.1 4.43   Triple Lynx Triple Lynx
OSK-W-20-2363-W2 751.0 753.5 2.5 5.90   Triple Lynx
 
Triple Lynx
 
including 753.0 753.5 0.5 12.0  
  867.6 870.0 2.4 5.18   Triple Lynx
 
Triple Lynx
 
including 867.6 868.0 0.4 27.7  
  887.0 889.0 2.0 3.75   Triple Lynx Triple Lynx
OSK-W-20-2363-W3 999.1 1001.6 2.5 4.52   Triple Lynx Triple Lynx
OSK-W-20-2371-W1 654.0 656.3 2.3 17.9   Triple Lynx
 
Triple Lynx
 
including 655.2 655.8 0.6 60.8  
  717.0 719.0 2.0 5.97   Triple Lynx Triple Lynx
  937.0 939.0 2.0 3.68   Triple Lynx
 
Triple Lynx
 
including 938.1 938.4 0.3 20.4  
  977.5 980.9 3.4 10.8   Triple Lynx
 
Triple Lynx
 
including 977.5 977.8 0.3 70.1  
OSK-W-20-2371-W2 815.0 817.0 2.0 3.60   Triple Lynx Triple Lynx
  1047.0 1049.0 2.0 4.04   Lynx 4
 
Lynx
 
including 1047.4 1048.1 0.7 11.4  
OSK-W-20-2375-W3 918.0 920.0 2.0 3.86   Lynx 4 Lynx
OSK-W-20-2381-W1 1332.0 1335.0 3.0 177 38.2 Lynx 4
 
Lynx
 
including 1332.0 1333.0 1.0 515 100
  1364.5 1366.5 2.0 66.6 26.6 Lynx 4
 
Lynx
 
including 1366.1 1366.5 0.4 300 100
OSK-W-20-2391 1183.3 1185.4 2.1 57.2 26.2 Triple Lynx
 
Triple Lynx
 
including 1185.1 1185.4 0.3 317 100
  1283.0 1285.1 2.1 9.73   Triple Lynx
 
Triple Lynx
 
including 1283.7 1284.0 0.3 58.1  
OSK-W-20-2391-W2 1380.0 1382.0 2.0 10.7   Triple Lynx
 
Triple Lynx
 
including 1380.9 1381.2 0.3 65.3  
  1390.3 1394.7 4.4 21.2   Triple Lynx


 
Triple Lynx


 
including 1392.8 1393.1 0.3 65.3  
and 1393.9 1394.7 0.8 58.0  
OSK-W-20-2394-W1 889.0 891.0 2.0 5.04   Triple Lynx Triple Lynx
OSK-W-20-2394-W3 1012.6 1015.0 2.4 33.5   Triple Lynx
 
Triple Lynx
 
including 1013.2 1014.0 0.8 99.9  
OSK-W-21-2445 445.0 447.0 2.0 10.3   Triple Lynx
 
Triple Lynx
 
including 446.7 447.0 0.3 61.6  
WST-20-0522 243.0 245.1 2.1 3.79   Lynx SW Lynx SW
WST-20-0523A 297.0 299.0 2.0 3.83   Lynx SW Lynx SW
WST-20-0524 238.7 241.0 2.3 3.60   Lynx SW
 
Lynx SW
 
including 239.6 240.0 0.4 16.9  
WST-20-0548A 271.4 273.6 2.2 3.60   Triple Lynx
 
Triple Lynx
 
including 272.1 272.8 0.7 10.9  
WST-20-0554 357.4 359.4 2.0 6.43   Triple Lynx Triple Lynx
  424.0 426.2 2.2 3.77   Triple Lynx Triple Lynx
WST-20-0569 412.0 414.0 2.0 4.31   Lynx SW
 
Lynx
 
including 412.4 412.7 0.3 27.6  
WST-20-0570 323.0 325.0 2.0 3.85   Lynx SW Lynx SW
WST-20-0574 302.9 305.7 2.8 9.11   Lynx SW Lynx SW
  308.0 310.0 2.0 4.07   Lynx SW Lynx SW
  394.5 396.9 2.4 5.64   Lynx SW Lynx SW
  416.0 418.7 2.7 9.20   Lynx SW
 
Lynx SW
 
including 418.4 418.7 0.3 78.9  
  510.8 513.0 2.2 4.58   Lynx SW
 
Lynx SW
 
including 511.7 512.2 0.5 20.0  
WST-20-0575 159.0 161.0 2.0 3.54   Triple Lynx Triple Lynx
WST-20-0602 397.1 400.4 3.3 9.53   Lynx SW
 
Lynx SW
 
including 397.6 398.0 0.4 28.7  
  572.0 577.3 5.3 43.4 29.9 Lynx SW
 
Lynx SW
 
including 572.0 573.0 1.0 172 100
WST-20-0603 250.5 253.7 3.2 56.4 34.3 Lynx SW
 
Lynx SW
 
including 252.0 252.7 0.7 201 100
  257.8 260.0 2.2 5.07   Lynx SW Lynx SW
  278.0 280.0 2.0 28.0   Triple Lynx
 
Triple Lynx
 
including 278.7 279.2 0.5 95.2  
WST-20-0606A 248.5 250.5 2.0 5.41   Lynx SW Lynx SW
  273.2 275.2 2.0 15.3   Lynx SW
 
Lynx SW
 
including 273.7 274.0 0.3 37.3  
  329.0 331.0 2.0 4.41   Lynx SW Lynx SW
WST-20-0609 299.0 301.4 2.4 12.9   Lynx SW
 
Lynx SW
 
including 300.9 301.4 0.5 57.0  
  326.7 329.0 2.3 4.77   Triple Lynx
 
Triple Lynx
 
including 326.7 327.4 0.7 11.1  
  346.7 349.0 2.3 3.90   Lynx SW
 
Lynx SW
 
including 346.7 347.2 0.5 17.4  
WST-20-0611 289.0 292.4 3.4 52.1 27.0 Triple Lynx
 
Triple Lynx
 
including 291.8 292.4 0.6 242 100
WST-20-0615 258.1 260.5 2.4 12.0   Lynx SW Lynx SW
WST-20-0626 451.7 453.8 2.1 4.51   Lynx SW Lynx SW
WST-20-0631 14.8 17.0 2.2 7.22   Lynx
 
Lynx
 
including 14.8 15.6 0.8 19.7  

Notes: True widths are estimated at 55 – 80% of the reported core length interval. See "Quality Control and Reporting Protocols" below. SW = Southwest.

Drill hole location

Hole Number Azimuth (°) Dip (°) Length (m) UTM E UTM N Elevation Section
OSK-W-20-2170-W7 128 -59 1205 453425 5435657 413 3900
OSK-W-20-2252-W10 129 -54 1226 453241 5435694 415 3750
OSK-W-20-2252-W8 129 -54 1239 453241 5435694 415 3750
OSK-W-20-2271-W2 120 -53 1223 453462 5435682 410 3950
OSK-W-20-2271-W5 120 -53 1247 453462 5435682 410 3950
OSK-W-20-2280-W7 127 -58 1131 453304 5435639 415 3775
OSK-W-20-2283-W2 135 -50 1011 452997 5435607 425 3500
OSK-W-20-2287 116 -53 1406 453607 5435714 404 4075
OSK-W-20-2292-W1 125 -54 1149 453035 5435561 420 3525
OSK-W-20-2313-W7 134 -52 1086 452965 5435583 420 3450
OSK-W-20-2313-W9 134 -52 1218 452965 5435583 420 3450
OSK-W-20-2322-W1 130 -54 1233 453608 5435715 403 4075
OSK-W-20-2328 136 -56 942 452872 5435153 409 3175
OSK-W-20-2363 139 -52 1031 452930 5435548 419 3425
OSK-W-20-2363-W1 139 -52 1059 452930 5435548 419 3425
OSK-W-20-2363-W2 139 -52 1035 452930 5435548 419 3425
OSK-W-20-2363-W3 139 -52 1185 452930 5435548 419 3425
OSK-W-20-2371-W1 123 -53 1032 452996 5435364 412 3375
OSK-W-20-2371-W2 123 -53 1251 452996 5435364 412 3375
OSK-W-20-2375-W3 122 -56 1020 453810 5435779 400 4300
OSK-W-20-2381-W1 134 -53 1512 453620 5435791 402 4125
OSK-W-20-2391 117 -57 1629 453281 5435894 408 3900
OSK-W-20-2391-W2 117 -57 1888 453281 5435894 408 3900
OSK-W-20-2394-W1 138 -52 1065 452922 5435468 415 3375
OSK-W-20-2394-W3 138 -52 1020 452922 5435468 415 3375
OSK-W-21-2445 141 -50 945 452906 5435434 415 3325
WST-20-0522 177 -52 457 453104 5435064 231 3325
WST-20-0523A 165 -46 387 453104 5435065 231 3325
WST-20-0524 182 -44 243 453103 5435064 231 3325
WST-20-0548A 166 -60 370 453228 5435126 135 3475
WST-20-0554 148 -44 562 453257 5435209 96 3525
WST-20-0569 164 -59 526 453104 5435065 231 3325
WST-20-0570 159 -51 454 453104 5435065 231 3325
WST-20-0574 139 -63 523 452955 5435003 253 3175
WST-20-0575 280 -33 280 453413 5435309 69 3725
WST-20-0602 160 -62 651 453227 5435126 134 3475
WST-20-0603 161 -59 525 453227 5435125 134 3475
WST-20-0606A 141 -56 531 453105 5435065 231 3325
WST-20-0609 188 -56 461 453177 5435126 173 3425
WST-20-0611 118 -63 378 453358 5435273 16 3650
WST-20-0615 177 -58 519 453227 5435125 134 3475
WST-20-0626 194 -59 471 453176 5435125 173 3425
WST-20-0631 136 -3 166 453322 5435235 55 3600

Lynx Zone

Mineralization occurs as grey to translucent quartz-carbonate-pyrite-tourmaline veins and pyrite replacement zones and stockworks. Vein-type mineralization is associated with haloes of pervasive sericite-pyrite ± silica alteration and contain sulphides (predominantly pyrite with minor amounts of chalcopyrite, sphalerite, galena, arsenopyrite, and pyrrhotite) and local visible gold. Replacement mineralization is associated with strong pervasive silica-sericite-ankerite ± tourmaline alteration and contains disseminated pyrite from trace to 80% with local visible gold. Pyrite stockworks can form envelopes that reach several tens of metres thick. Fuchsite alteration is common and is spatially constrained to near the gabbros. Mineralization occurs at or near geological contacts between felsic porphyritic or fragmental intrusions and the host rhyolites or gabbros and locally can be hosted along the gabbro-rhyolite contact.

Qualified Person
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Louis Grenier, M.Sc.A., P.Geo. (OGQ 800), Project Manager of Osisko's Windfall Lake gold project, who is a "qualified person" as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").

Quality Control and Reporting Protocols
Truewidthdeterminationisestimatedat55-80%ofthereportedcorelengthintervalforthezone.Assaysareuncutexceptwhere indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Reported intervals include minimum weighted averages of 3.0 g/t Au diluted over core lengths of at least 2.0 metres. NQ core assays were obtained by either 1-kilogram screen fire assay or standard 50-gram fire-assaying-AA finish or gravimetric finish at (i) ALS Laboratories in Val d'Or, Québec, Vancouver, British Colombia, Lima, Peru or Vientiane, Laos (ii) Bureau Veritas in Timmins, Ontario. The 1-kilogram screen assay method is selected by the geologist when samples contain coarse gold or present a higher percentage of pyrite than surrounding intervals. Selected samples are also analyzed for multi-elements, including silver, using a Four Acid Digestion-ICP-MS method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control ("QA/QC") and interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are included with every 20 samples for QA/QC purposes by the Corporation as well as the lab. Approximately 5% of sample pulps are sent to secondary laboratories for check assay.

About the Windfall Gold Deposit
The Windfall gold deposit is located between Val-d'Or and Chibougamau in the Abitibi region of Québec, Canada. The mineral resource defined by Osisko, as disclosed in the news release dated February 17, 2021 and supported by the technical report entitled “Mineral Resource Estimate Update for the Windfall Project, Eeyou Istchee James Bay, Québec, Canada” dated March 8, 2021 (with an effective date of November 30, 2020), and assuming a cut-off grade of 3.50 g/t Au, comprises 521,000 tonnes at 11.3 g/t Au (189,000 ounces) in the measured mineral resource category, 5,502,000 tonnes at 9.4 g/t Au (1,668,000 ounces) in the indicated mineral resource category and 16,401,000 tonnes at 8.0 g/t Au (4,244,000 ounces) in the inferred mineral resource category. The key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in the February 17, 2021 news release are further described in the full technical report prepared by BBA Inc. in accordance with NI 43-101 and is available on SEDAR (www.sedar.com) under the Corporation's issuer profile. The Windfall gold deposit is currently one of the highest-grade resource-stage gold projects in Canada and has world-class scale. Mineralization occursinthreeprincipalzones:Lynx,Main Zone,andUnderdog.Mineralization is generallycomprised ofsub-vertical zonesfollowingintrusive porphyrycontactsplungingtothenortheast.The resources are defined fromsurfacetoadepthof1,600metres as it now includes the Triple 8 (T8) zone. The resources excluding T8 are defined from surface to a depth of 1,200 metres. The deposit remainsopen alongstrikeandatdepth.Mineralizationhasbeenidentifiedatsurfaceinsomeareasandasdeepas2,625metres in others with significant potential to extend mineralization down-plunge and atdepth.

About Osisko Mining Inc.
Osisko is a mineral exploration company focused on the acquisition, exploration, and development of gold resource properties in Canada. Osisko holds a 100% interest in the high-grade Windfall gold deposit located between Val-d'Or and ChibougamauinQuébecandholdsa100%undividedinterestinalargeareaofclaimsinthesurroundingUrbanBarryarea and nearby Quévillon area (over 2,700 squarekilometres).

Cautionary Note Regarding Forward-Looking Information
This news release contains "forward-looking information" within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates, projections and interpretations as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always, using phrases such as "expects", or "does not expect", "is expected", "interpreted", "management's view", "anticipates" or "does not anticipate", "plans", "budget", "scheduled", "forecasts", "estimates", "potential", "feasibility", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. This news release contains the forward-looking information pertaining to, among other things: the Windfall gold deposit being one of the highest-grade resource-stage gold projects in Canada and having world-class scale; the key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in this news release; the prospects, if any, of the Windfall gold deposit; timing and ability of Osisko to file a technical report for the mineral resource estimate disclosed in this news release; the timing and ability of Osisko, if at all, to publish a feasibility study for the Windfall gold deposit; the amount and type of drilling to be completed and the timing to complete such drilling; the focus of the remaining infill drilling; the trend of grade increase; the Lynx zone remaining open to expansion down plunge; upgrading a inferred mineral resource to a measured mineral resource or indicated mineral resource category; future drilling at the Windfall gold deposit; the significance of historic exploration activities and results. Such factors include, among others, risks relating to the ability of exploration activities (including drill results) to accurately predict mineralization; errors in management's geological modelling; the ability of Osisko to complete further exploration activities, including (infill) drilling; property and royalty interests in the Windfall gold deposit; the ability of the Corporation to obtain required approvals; the results of exploration activities; risks relating to mining activities; the global economic climate; metal prices; dilution; environmental risks; and community and non-governmental actions. Although the forward-looking information contained in this news release is based upon what management believes, or believed at the time, to be reasonable assumptions, Osisko cannot assure shareholders and prospective purchasers of securities of the Corporation that actual results will be consistent with such forward-looking information, as there may be other factors that cause results not to be as anticipated, estimated or intended, and neither Osisko nor any other person assumes responsibility for the accuracy and completeness of any such forward-looking information. Osisko does not undertake, and assumes no obligation, to update or revise any such forward-looking statements or forward-looking information contained herein to reflect new events or circumstances, except as may be required by law.

CONTACT INFORMATION:
John Burzynski
Chief Executive Officer
Telephone (416) 363-8653