Asanko Gold Expands Near Mine Exploration Program as Dynamite Hill Continues to Deliver Results

Highlights: - Completion of 6,700m infill drilling program at Dynamite Hill, a near surface mineralized trend located approximately 7 km from planned Phase 1 milling facility at the Asanko Gold Mine. - Positive results continue to be observed and confirm continuity of gold mineralisation, including; 21m @ 2.14g/t, 50m @ 1.23g/t, 25m @ 3.37g/t, 30m @ 2.53g/t, and 46m @ 3.02g/t. - Resource modelling, definitive mine planning, geotechnical, hydrogeological, and permitting related studies to be completed by Q4 2014 in anticipation of mining Dynamite Hill in 2016 during the start-up of Phase 1 of the Asanko Gold Mine. - An additional 10,000m drill program is planned for H2 2014 to test similar high priority, near mine targets.

VANCOUVER, BRITISH COLUMBIA-- Jul 8, 2014 - Asanko Gold Inc. ("Asanko" or the "Company") (AKG.TO)(NYSE MKT:AKG) is pleased to announce highly encouraging results from its 2014 infill drilling program at Dynamite Hill which confirms the continuity of the gold mineralisation. Dynamite Hill is located approximately 7 km to the north-east of the planned processing facility for Phase 1 of its flagship project, the Asanko Gold Mine ("AGM" or the "Project") in Ghana, West Africa. Phase 1 of the AGM envisages the start of construction in Q3 2014 at the recently acquired Obotan project in Ghana. First gold production is anticipated in Q1 2016.

Geological and structural models are now being constructed for Dynamite Hill, which will provide the basis for a maiden mineral resource estimate ("MRE"). Geotechnical, hydrogeological, and permitting related studies are on-going and, together with the MRE, will be incorporated into the Definitive Project Plan, to be completed by Q4 2014. It is anticipated that Dynamite Hill will be mined to supplement ore feed from the main Phase 1 pit at Nkran during the start-up of operations in 2016 and early years of production at the AGM.

Dynamite Hill lies within the north east extension of the Nkran Shear Corridor which hosts several other deposits, including the Nkran deposit. The infill drilling program was initiated in April 2014, as a follow up to two successful phases of exploration drilling in 2013, and was aimed at further delineating the ore body and generation of a maiden MRE.

An additional 2,094m of core and 4,611m of RC were drilled during from April through June for a total of 6,705m in 42 drill holes in the 2014 infill program. Assay results received from the first 32 of 42 drill holes continue to demonstrate the consistency of mineralisation within the ore body. Significant intercepts received to date from the latest round of drilling include the following:

Additional Near Mine Exploration

Asanko has one of the largest concession packages in Ghana with over 650km² of semi-contiguous concessions spanning 80km of the Asankrangwa Gold Belt. The belt is underexplored, and only limited work has been undertaken with a holistic view of the regional prospectivity.

In addition to Dynamite Hill, the Company has identified several near mine targets which will be the focus of drilling programs in H2 2014 with the aim of discovering additional near surface oxide deposits that can provide additional feed to Phase 1 of the AGM. These targets range from untested geochemistry anomalies to extensions of existing deposits within the various parallel structural corridors that make up the Asankrangwa gold belt. These drilling programs will commence in Q3 2014 and are expected to be completed by the end of the year.

Detailed Dynamite Hill Drilling Results

Since the last announcement, dated May 5, 2014, an additional 6,705m of drilling was completed in 42 holes. These infill results continue to demonstrate the continuity of mineralisation and confirm the potential of the Dynamite Hill discovery. The proximity of Dynamite Hill to the other AGM deposits and planned infrastructure of Phase 1 of the AGM can be seen in Figure 1 below. Dynamite Hill drill hole locations and selected incepts can be seen in the attached Figure 2, as well as in cross-section in Figures 3 through 5. A complete description of the drill hole locations and intersections are provided for drill holes for which assays have been received from this program in the attached Table 1. All figures and tables are also available on the Company's website at www.asanko.com.

Qualified Persons and QA/QC

Benjamin Gelber, P. Geo. is the Qualified Person with respect to NI 43-101 at the Asanko Gold Mine project. RC samples were taken at one-meter intervals under dry drilling conditions by in house qualified geologists utilizing drilling and sampling techniques widely accepted in resource definition studies of other West African gold deposits. All reverse circulation drill samples are weighed on site and all core is drilled at HQ diameter and sawed into equal halves on site. All samples are assayed using standard 50 gram fire assay with atomic absorption finish by one of ALS Chemex Labs in Kumasi, Ghana, SGS Labs in Tarkwa, Ghana, or Performance Laboratories in Bibiani, Ghana. QA/QC programs using internal and external standard samples, re-assays, and blanks indicate good accuracy and precision in a large majority of standards assayed. Repeatability in duplicate samples is generally within 10% variance. In instances where variance is greater than 10%, the assays from both samples are averaged. A minimum of a 0.5 g/t cut off at beginning and end of the intercept and allowing for no more than three consecutive samples (three meters) of less than 0.5 g/t Au are included. Holes are drilled perpendicular to mineralisation and are inclined at 45 to 60 degrees, so true widths are estimated to be over 80% of the drilled widths. The intercepts reported in this release were only those with grade-widths above a value of 20 (g/t gold multiplied by metres of intercept).

For further information please visit www.asanko.com

About Asanko Gold Inc.

Asanko's vision is to become a mid-tier gold mining company that maximizes value for all its stakeholders. Asanko's flagship project is the fully financed, multi-million ounce Asanko Gold Mine Project located in Ghana, West Africa.

Asanko is managed by highly skilled and successful technical, operational and financial professionals. The Company is strongly committed to the highest standards for environmental management, social responsibility, and health and safety for its employees and neighbouring communities.

To view the figures accompanying this press release, please visit the following link:

http://file.marketwire.com/release/956241.pdf

Table 1

Forward-Looking and other Cautionary Information

This release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts, that address estimated resource quantities, grades and contained metals, possible future mining, exploration and development activities, are forward-looking statements. Although the Company believes the forward-looking statements are based on reasonable assumptions, such statements should not be in any way construed as guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices for metals, the conclusions of detailed feasibility and technical analyses, lower than expected grades and quantities of resources, mining rates and recovery rates and the lack of availability of necessary capital, which may not be available to the Company on terms acceptable to it or at all. The Company is subject to the specific risks inherent in the mining business as well as general economic and business conditions. For more information on the Company, Investors should review the Company's annual Form 20-F filing with the United States Securities Commission and its home jurisdiction filings that are available at www.sedar.com.

Neither Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.

Cautionary Note to US Investors Regarding Mineral Reporting Standards:

Asanko has prepared its disclosure in accordance with the requirements of securities laws in effect in Canada, which differ from the requirements of US securities laws. Terms relating to mineral resources in this press release are defined in accordance with National Instrument 43-101 - Standards of Disclosure for Mineral Projects under the guidelines set out in the Canadian Institute of Mining, Metallurgy, and Petroleum Standards on Mineral Resources and Mineral Reserves. The Securities and Exchange Commission (the "SEC") permits mining companies, in their filings with the SEC, to disclose only those mineral deposits that a company can economically and legally extract or produce. Asanko uses certain terms, such as, "measured mineral resources", "indicated mineral resources", "inferred mineral resources" and "probable mineral reserves", that the SEC does not recognize (these terms may be used in this press release and are included in the public filings of Asanko which have been filed with securities commissions or similar authorities in Canada).

Alex Buck, Manager - Investor Relations
Telephone: +44-7932-740-452
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Greg McCunn, Chief Financial Officer
Telephone: +1-778-729-0604
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Asanko Gold Inc.
General This email address is being protected from spambots. You need JavaScript enabled to view it.