- Published: 26 September 2012
- Written by Editor
Silver Bull Intersects 151.6g/t Silver Over 57.30 Meters Including 600.6g/t Over 5.95 Meters on the Sierra Mojada Project, Coahuila, Mexico
Highlights from the fifth batch of 10 holes include:
-- High grade silver intercepts including: 57.30 meters @ 151.6g/t Ag
(including 5.95m @ 600.6g/t Ag, 5.05m @ 466.7g/t Ag & 2.1m @ 695.7g/t
Ag), 32.00 meters @ 145.1g/t Ag (including 14.65m @ 248.7g/t Ag), 32.50
meters @ 81.7g/t Ag (including 3m @ 233.9g/t Ag & 2.5m @ 248.3g/t Ag)
and 7 meters @ 140.8g/t Ag (including 1.75m @ 437g/t Ag).
-- High grade zinc intercepts including: 14 meters @ 7.84% Zn (including
1.9m @ 31.52% Zn), 11.8 meters @ 6.90% Zn, 4.5 meters @ 20.17% Zn and 2
meters @ 31.43% Zn.
-- Mineralization remains open in the north, south, east and westerly
directions.
Silver Bull's 3,000 meter drill program in the high grade silver zone is ongoing with 2 underground "Termite" rigs twinning a series of long holes with up to 50 meter long BQ sized diamond core drill holes. The high grade silver zone is hosted along a series of "stacked" east-west trending structures with a combined traceable strike of approximately 3 kilometers at the eastern end of the Shallow Silver Zone. The purpose of the program is to increase confidence in a historical long hole data set which defines the high grade silver zone and represents just under 38,000 meters of drilling which was either severally restricted or discarded in Silver Bull's latest NI43-101 resource report on the Shallow Silver Zone dated July 5, 2012. As announced in the September 14, 2012 news release, Silver Bull will expand the underground drill program with an additional 2,000 meters of drilling to twin a series of long holes in the high grade zinc zone, which sits adjacent to and below the silver mineralization.
In addition to confirming the grade and tenor of the silver and zinc mineralization with the twinning program, much of the historical long hole data set ended in significant mineralization, so the program will also look to extend the mineralization by drilling longer holes. Due to the limited range of the Termite drills, and despite extending some holes by as much as 25 meters, some holes still end in mineralization.
This recent drilling, coupled with historical channel sampling and our ongoing underground mapping program shows at least three distinct east-west trending structures which host high grade zones of silver mineralization. In places, these east-west trending structures are cross cut by a series of northeast trending faults resulting in a "blow out", which yields a much wider zone of high grade silver mineralization. A halo of silver mineralization grading up to 80g/t exists in between the high grade zones and provides the tonnage for a potential "bulk minable" deposit in an open pit setting. The high grade silver zone remains open in all directions and sits above and slightly adjacent to a significant body of zinc mineralization which has a present strike length of 1.5 kilometers and an average grade greater than 8% Zn.
A table of holes T12031 to T12039 from the underground long hole twinning program is shown below.
---------------------------------------------------------------------------
Total
Drill Depth From To Interval Ag Zn
Station HoleID (m) (m) (m) (m) g/t % Includes Comment
---------------------------------------------------------------------------
Station T12031 11.70 0.00 11.70 11.70 59.86 1.94 including ended in
4 2.05m @ mineral-
135.05g/t ization
Ag
---------------------------------------------------------------------------
Station T12032 34.60 0.00 14.00 14.00 58.61 7.84 including
4 1.1m @
256g/t Ag,
1.5m @
134g/t Ag
and 1.9m @
31.52% Zn
---------------------------------------------------------------------------
Station T12033 29.95 0.00 19.00 19.00 55.07 including
4 1m @
288g/t Ag,
11.8m @
6.9% Zn,
1m @ 18.1%
Zn and 2m
@ 13.83%
Zn
---------------------------------------------------------------------------
Station T12034 33.75 0.00 32.00 32.00 145.11 3.52 including ended in
5 14.65m @ mineral-
248.7g/t ization
Ag and 2m
@ 31.43%
Zn
---------------------------------------------------------------------------
Station T12035 30.75 0.00 23.05 23.05 86.45 5.83 including
5 1m @
157g/t Ag,
2.8m @
133.14g/t
Ag, 3m @
181.4g/t
Ag, 4.5m @
20.17% Zn
and 1.25m
@ 8.18% Zn
---------------------------------------------------------------------------
Station T12036 29.55 0.00 29.55 29.55 18.73 including ended in
6 1m @ mineral-
227g/t Ag ization
---------------------------------------------------------------------------
Station T12037 57.30 0.00 57.30 57.30 151.60 including ended in
6 2.1m @ mineral-
695.71g/t ization
Ag, 5.05m
@
466.79g/t
Ag, 5.95m
@ 600.6g/t
Ag, 6.5m @
4.89% Zn
and 3.5m @
8.52% Zn
---------------------------------------------------------------------------
Station T12038 57.55 0.00 7.00 7.00 140.82 1.39 including
6 1.75m @
437g/t Ag
---------------------------------------------------------------------------
Station T12038 57.5525.05 57.55 32.50 81.74 including ended in
6 3m @ mineral-
233.92g/t ization
Ag, 2.5m @
248.32g/t
Ag and
1.23% Zn,
7.95m @
2.82% Zn
and 1.95m
@ 5.32% Zn
---------------------------------------------------------------------------
Station T12039 6.70 0.00 6.70 6.70 55.21 1.86 including ended in
6 1.3m @ mineral-
164g/t Ag, ization
0.9m @
5.13% Zn
and 6.7m @
0.65% Pb
---------------------------------------------------------------------------
(i) Intervals shown are mineralized lengths of core and are not necessarily
true widths.
Tim Barry, President, CEO and director of Silver Bull states, "We continue to see very positive results as expected from our twinning program in the high grade silver zone. Holes that intercept the east-west trending structures that control the high grade silver mineralization are typically grading well over 100g/t silver. Holes that intercept the lower grade halo that surrounds the high grade packages are often grading between 50-80g/t silver and show great continuity, which will provide the tonnage for a potential bulk mineable deposit. We will continue to prove out this very significant high grade silver zone, and then move the drill program into the high grade zinc zone, which is currently classified as an 'exploration target' and sits below and adjacent to the silver zone."
About the Shallow Silver Zone: The "Shallow Silver Zone" is an oxide silver deposit (+/- zinc & lead), hosted along an east-west trending fracture-karst system set in a cretaceous limestone-dolomite sequence. At a 20g/t cutoff grade the Shallow Silver Zone has a measured resource of 3.023 million tonnes at an average grade of 65 g/t for 6.343 million contained troy ounces of silver, an indicated resource of 38.560 million tonnes at an average grade of 50 g/t for 61.694 million contained troy ounces of silver, and an inferred resource of 6.491 million tonnes at an average grade of 45 g/t for 9.478 million contained troy ounces of silver. The mineralized body averages between 30m - 90m thick, up to 200m wide and remains open in all directions. Approximately 60% of the current 3.8 kilometer strike length is at or near surface before dipping at around 6 degrees to the east.
Zinc Exploration Target: In addition to the silver resource, Sierra Mojada also contains a significant "zinc oxide exploration target" which sits directly below and adjacent to the Shallow Silver Zone at its eastern end. The "Red" and "White" zinc zones have been identified through historical data containing 3,733 channels and 1,045 long holes over a 1.5 km strike length, but has too few core drill holes to presently delineate a NI43-101 compliant mineral resource. The zinc mineralization is composed of hemimorphite and lesser smithsonite and forms a tabular body hosted mostly within the upper dolomite along the east-west trending Sierra Mojada fault. It is located 600 meters from a functioning railway and has been periodically mined for zinc grading greater than 20% over the last 100 years.
To view Figures 1 and 2, click on the following link: http://media3.marketwire.com/docs/s925m.pdf
Sample Analysis and QA/QC: All samples have been analyzed at ALS Chemex in North Vancouver, BC, Canada. Samples are first tested with the "ME-ICP41m" procedure which analyzes for 35 elements using a near total aqua regia digestion. Samples with silver values above 100ppm are re-analyzed using the Ag-GRA21 procedure which is a fire assay with a gravimetric finish. Samples with zinc, lead, and copper values above 10,000ppm (1%) are re-analyzed using the AA46 procedure which is a near total aqua regia digestion with an atomic absorption finish.
A rigorous procedure is in place regarding sample collection, chain of custody and data entry. Certified standards and blanks, as well as duplicate samples are routinely inserted into all sample shipments to ensure integrity of the assay process.
About Silver Bull: Silver Bull is a US registered mineral exploration company listed on both the NYSE MKT and TSX stock exchanges and based out of Vancouver, Canada. The flag ship "Sierra Mojada" project is located 150 kilometers north of the city of Torreon in Coahuila, Mexico, and is highly prospective for silver and zinc. Silver Bull also has 2 mineral licenses in Gabon, Central Africa, which are prospective for gold, manganese, and iron ore.
The technical information of this news release has been reviewed and approved by Tim Barry, MAusIMM, a qualified person for the purposes of National Instrument 43-101.
On behalf of the Board of Directors
Tim Barry, MAusIMM, Chief Executive Officer, President and Director
Cautionary Note to U.S. Investors concerning estimates of Measured, Indicated and Inferred Resources: This press release uses the terms "measured resources", "indicated resources", and "inferred resources" which are defined in, and required to be disclosed by, NI 43-101. We advise U.S. investors that these terms are not recognized by the United States Securities and Exchange Commission (the "SEC"). The estimation of measured and indicated resources involves greater uncertainty as to their existence and economic feasibility than the estimation of proven and probable reserves. U.S. investors are cautioned not to assume that measured and indicated mineral resources will be converted into reserves. The estimation of inferred resources involves far greater uncertainty as to their existence and economic viability than the estimation of other categories of resources. U.S. investors are cautioned not to assume that estimates of inferred mineral resources exist, are economically minable, or will be upgraded into measured or indicated mineral resources. Under Canadian securities laws, estimates of inferred mineral resources may not form the basis of feasibility or other economic studies.
Disclosure of "contained ounces" in a resource is permitted disclosure under Canadian regulations, however the SEC normally only permits issuers to report mineralization that does not constitute "reserves" by SEC standards as in place tonnage and grade without reference to unit measures. Accordingly, the information contained in this press release may not be comparable to similar information made public by U.S. companies that are not subject NI 43-101.
Cautionary note regarding forward looking statements: This news release contains forward-looking statements regarding future events and Silver Bull's future results that are subject to the safe harbors created under the U.S. Private Securities Litigation Reform Act of 1995, the Securities Act of 1933, as amended (the "Securities Act"), and the Securities Exchange Act of 1934, as amended (the "Exchange Act"), and applicable Canadian securities laws. Forward-looking statements include, among others, statements regarding measured, indicated and inferred resource estimates, the anticipated scope and targets of future drilling in the Shallow Silver Zone, the ability to increase the confidence of the long hole data set, the ability to increase the resource and overall grade at the Sierra Mojada project and the ability to delineate a zinc resource in the zinc exploration target. These statements are based on current expectations, estimates, forecasts, and projections about Silver Bull's exploration projects, the industry in which Silver Bull operates and the beliefs and assumptions of Silver Bull's management. Words such as "expects", "anticipates", "targets", "goals", "projects", "intends", "plans", "believes", "seeks", "estimates", "continues", "may", variations of such words, and similar expressions and references to future periods, are intended to identify such forward-looking statements. Forward-looking statements are subject to a number of assumptions, risks and uncertainties, many of which are beyond our control, including such factors as the results of exploration activities and whether the results continue to support continued exploration activities, unexpected variations in ore grade, types and metallurgy, volatility and level of commodity prices, the availability of sufficient future financing, and other matters discussed under the caption "Risk Factors" in our Annual Report on Form 10-K for the fiscal year ended October 31, 2011 and our other periodic and current reports filed with the SEC and available on www.sec.gov and with the Canadian securities commissions available on www.sedar.com. Readers are cautioned that forward-looking statements are not guarantees of future performance and that actual results or developments may differ materially from those expressed or implied in the forward-looking statements. Any forward-looking statement made by us in this release is based only on information currently available to us and speaks only as of the date on which it is made. We undertake no obligation to publicly update any forward-looking statement, whether written or oral, that may be made from time to time, whether as a result of new information, future developments or otherwise.
Contacts:
Silver Bull Resources Inc.
Matt Hallaran
Investor Relations
+1 604 336 8096
This email address is being protected from spambots. You need JavaScript enabled to view it.
